Siemens RDJ10RF – Installation Guide

The Siemens RDJ10RF Installation Guide provides detailed instructions for safely installing your wireless thermostat. Learn how to mount the thermostat, connect wiring, configure settings, and ensure proper operation with step-by-step guidance. Perfect for residential and commercial heating and cooling systems.

Siemens RDJ10RF — Troubleshooting

Siemens RDJ10RF — Troubleshooting

Thermostat not powering on

Possible cause:

No 24V AC supply or incorrect wiring

Solution: Verify wiring connections and ensure power supply is active

📶

Display is blank

Possible cause:

Power interruption or depleted backup batteries

Solution: Restore power and replace batteries if needed

❄️

AC does not start

Possible cause:

Y terminal not connected or low voltage

Solution: Check Y wire connection and measure voltage at AC unit

🌡️

Heater not engaging

Possible cause:

W terminal wiring issue or incorrect system type setting

Solution: Verify W wire connection and system configuration

⚙️

Fan runs continuously

Possible cause:

Fan mode set to ON

Solution: Change fan mode to AUTO

Siemens RDJ10RF — FAQs

Frequently Asked Questions

Why does the thermostat display remain blank? +

Check that the thermostat is properly powered. Verify wiring connections and ensure the 24V AC supply is active. Replace backup batteries if needed.

How do I reset the Siemens RDJ10RF thermostat? +

Press and hold the Reset button (or follow the specific button combination) until the display restarts. This will restore factory settings if needed.

Can this thermostat control both heating and cooling systems? +

Yes. When correctly wired, the RDJ10RF can control both AC cooling and furnace heating systems.

Why does the fan run continuously? +

If the fan mode is set to ON, it will run non-stop. Change the fan setting to AUTO so it cycles according to system operation.

What should I do if the AC or heater does not start? +

Check the corresponding terminal connections (Y for cooling, W for heating) and ensure the system type is correctly configured. Verify voltage at the system unit.

Join The Conversation

Here you can share your thoughts or experiences about this thermostat. If you have any questions, please make sure to read the manual first. If you can’t find the manual, you can request one using our contact form.

Scroll to Top